Brake pads EBC or Zimmermann

I went with the Red Stuff pads and they have been noise free and stop on a dime. Very low dust, especially when used with the armor all wheel protector.

I went from stock pads to redstuff, and the brake dust is about 1/4 to 1/3 of what it was. The stock pad's dust was really hard to remove as well. The redstuff pad dust, the little that is there come off easily. I do find that the redstuff pads quickly heat up the calipers though and they tend to fade more then with the stock pads.

I used disks from JC Whitney and pads from EBC (EBC red stuff, nice, came with all sensors, anti squeak pads, a little packet of anti seize for the caliper pins).

I can tell you that after having my EBC slotted rotors and greenstuff pads on for several months, I am very happy with the upgrade. The setup I have now bites better than I could have hoped for.

I'm a big fan of EBC red stuff pads, IMO they are the best and actually have to go through testing to get a cert number that proves they do EVERYTHING better than the OEM pads

Just today I changed the rear brake pads and rotors on my 2004 Jetta GLI 1.8t. I got some new Zimmerman rotors and EBC Red Stuff pads on now, and obviously that fixed the grinding.

I can say that the boxster brake setup completely outperforms the OEM setup. I can say that with confidence due to my experience with with both setups...the brembo caliper easily exceeds the limitations of the OEM single piston caliper. My car lost several feet upon an aggressive 65-0 test. I performed both tests several times on a long straightaway (closed course ) With textar pads on both setups. The Porsche brakes were notably shorter distances... Then i upgraded the pads to ebc red stuff and those did even better aggressive stops.

I used: EBC Yellow Tuff Pads Stoptech Powerslot Rotors I painted the anti-squeal spring and caliper support bracket black, nothing too over the top.

Alright, I will look into the Green stuff. I'm just not wanting to go too high, because I have many other things needing fixed on the car (80k mile service stuff, tires, check engine light. etc.... Trying to get it all done as soon as possible, using a little of each paycheck I get.) Autozone only carries Duralast... which doesn't have the best reviews on their website. And last time I did a pair of my brakes, they gave me the wrong ones and I didn't realize it until the car was apart. Quick question... Are these the exact same item, or am i missing a difference?: http://www.ecstuning.com/Volkswagen-Jetta_VI-Sedan-2.0/ES517817/ http://www.amazon.com/EBC-Brakes-DP...Series/dp/B001C8WOH6/ref=sr_1_1?ie=UTF8&qid=1405277008&sr=8-1&keywords= DP21517 I ask, because ECS says they fit my car and Amazon says they don't. But they are the same Part # (but amazon is $10 cheaper and has free ship.). EDIT: Also, is their a DIY guide for doing brakes on the MKVI? I don't do a lot of car repairs myself (Limited time/bad back from wreck, that makes working on cars hard)... But I am willing to give it a try if I have an idea of what I am doing.

fast road pads like EBC Greens are actually slower to operate from cold. So much so that I nearly failed to stop for a pedestrian crossing one cold morning soon after start up. I simply wasn't expecting my pads to be so bad first thing. With the soft stock pads you get an intial bite that you don't get with fast road pads. This is a world away from the EBC Greens on 280mm brakes that used to get totally chewed up in one day at Sandown. Or the EBC Reds that disintegrated entirely.