EBC BlueStuff NDX has my vote! They perform excellent on the track and are quiet for the street. I use stock rotors but feel free to upgrade those if you feel like it’s worth it for you. Upgrade the brake fluid as well. I used Motul 660.
The only pads I run on any of my vehicles now are EBC Brakes. Redstuff for daily/street leaning as they are less noisy, aggressive, and leave low dust with exceptional braking performance cold or warmed up. These are ceramic so they also have longer life than traditional pads. Yellowstuff for anything higher weight or power (have had them on my 955 Cayenne Turbo, an e90 335i, and on a Lexus SC400). Outstanding braking bite and not too aggressive for the street. A little more responsive in the cold but only marginally. The only downside is the high amount of brake dust, but a good cleaner and wheel coating can ease that. These are metallic so life is less but they have more of the “bite” many look for when they want a track-capable pad.
EBC Blues or Ferodo DS2500s are the minimum baseline for what I'd put on the track. They can both handle novice/intermediate pace without being absolute shrieking banshees on the street. Lot of dust though, and they likely won't hold up to more than 4-5 track days. But very streetable.
I've had them for 30k km and they're great. Perfect for spirited driving / autocross and I've only ever had brake dust squeal once and for a very short time.
My EBC reds say to use pads easy for 200 miles. Then do 4-5 hard stops from 50 mph
Others like EBC have specific procedures for heating and cooling the brakes to make them to the surface.
I put some EBC Yellow pads on for a track day and have been enjoying them on the street since.
They're a great fast street pad. I liked them for daily use and the occasional Pass or backroad run but they're just not great for a track day. They get chewed up fairly quick and overheat quickly as well.
I'd go Pagid because they're a familiar brand. Had some Eicher pads that left really awful dust and were quite loud under gentle braking, lasted 5k miles before I gave up and swapped them out.
I’ve driven roughly 150 miles and I’ve done EBC’s suggested bed in process. But they’re still squealing when I’m coasting from 0-40mph. The squealing sounds like the wear indicator rubbing on the rotor, but they’re brand new and nowhere close to the rotor. Do they take longer to bed in? The squealing is really high pitched and annoying
Write your review
Help others - share your experience with this part.
