Brake pads EBC or Ferodo

I like the Ferodo DS2500 for street/canyons, tho I find they’re pretty dusty.

Since most pads won't even get that close to the edge, i wouldn't have thought twice about mounting it. Sure, i would check if it IS touching, but i really doubt it.

Front brakes and tyres you can replace if you feel they are not adequate. I replaced Tyre to protorq extreme and front pad to ebc fa209hh

Because I track my car, I have performance street pads and track pads. EBC yellow for street and RP-1 if I'm running an event + dot4

If you have 312 mm front rotors I'd suggest to upgrade to FER-FCP4433G

DS3.12 pads https://www.brakes-shop.com/fer-fcp4433g-ferodo-ds3-12-brake-pads-front.html and Motul 600 / 660 brake fluid (or Castrol React SRF).

With this setup you will be limited by your tyres and suspension.

Don't buy DBA rotors and pads or EBC pads. You will destroy them (like crack in pieces).

Don't run with OEM fluid or pads \u2014 you will definitely lose stopping power relatively early on.

I used EBC Redstuff pads, absolutely love them.

I drive a Twingo rs at the moment, with ebc yellow brakes and they are fine enough for the money. Also had them on my previous car a turbo mx5 and they did the job.

I tried EBC on one SVT Focus and my first Fiesta ST. Yellowstuff on both.

They're marginally better than the OE ST pads, aside from dust production. They do not bite as hard as Hawk 5.0s or Stoptech Sports (which are my go-tos now; $76 for fronts from Tirerack). They do not stand up to actual track day driving (no one I know who does track stuff uses EBC). They're okay for autocross.

I burned through a set of EBC brakes, they dont last long and they have a lot more dust than ceramic Brembo pads.

jai des ds2500 et mes freins sifflent tres fort cest chiant