Brake pads Carbotech or Raybestos

I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.

On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.

For aftermarket pads, Raybestos have had very good fitment and quality, I dig it. Their product line is called like "el3ment" or some such.

Hey, I track. MK7.5! The floating calipers flex which means you get more pressure on the outer half of the rotor. It's annoying but it's not a problem in my experience.

Something like a Carbotech XP12 pad might do better with the heat but adding brake ducts from the RS3 is cheap and will help quite a bit.

Girodisc should have a 357mm disc available when you've gone through the OE rotors. They're slotted instead of drilled and are 2 piece (aluminum hat).

I am currently using Carbotech XP10's in front and the XP8's for the rears. I really like them and have not had an issue so far. Plus the company has great customer service. They are definitely NOT a street pad, and I need to swap them the night before a track meet and put street pads on the day after, but the effort is worth it.

I just replaced my pads all around with Carbotech so i get majorly reduced brake dust and just OEM rotors.

I would go with the Raybestos Element 3 kit sold here. $180 total roughly front and back. 2 seperate kits, one for front, one for back. You will find this under the fully coated section here as they have different grades of pads. For the price and how long these last, you cannot beat it. And better than the top quality parts local parts stores carry, in fact Napa sells these rebranded as their premium top of the line brakes and rotors. For the price, and the quality, is by far your best option. There are better pads that will last a little longer, but are much more pricey. With the miles you drive, these will last 5-10 years. I use these on all vehicles in the rust belt, as these are rust coated.

If you KNOW you're going to be doing a lot of track days, you definitely want to go straight to some full blown track pads, at least for when you're at the track, along with fluid.

I use these pads (and rotors) on my FX35. A couple things I have noticed:

1). There have never been appropriate rattle clips included with any set of pads that I have ever purchased for this car…ever. I am still on OEM stuff at 180k miles. That isn’t just Raybestos. I even ordered Centric hardware…no dice. Not even close. Mind you, I always order model-specific hardware. No idea what the issue is, but it is clearly for the wrong car.

2). These pads take a few stops to heat up, which I kind of expected. I am satisfied with them on my daily, but the rotors are another matter entirely. They all warp within a month or two. That is odd considering they advertise the construction as Dura-Bar. That should be pretty resistant to that kind of thing. They definitely don’t hold up like Centrics do.

3). The shims have a nasty habit of falling off. Not while driving, but during service. You have one maybe two removals before they go MIA.

Other than that, I am not sure that I have noticed an issue with the pads being either wrong or out of tolerance. That is very not what I would expect from a brand like this.

I've used Raybestos before on VW GTI. They had a distinct feel and reminded me of... Literally every other set of brake pads I've ever used. Just save your money bro.