Brake pads Carbotech or Mintex

I'm a Mintex Red Box fan, I also upgrade to AutoTech drilled/vented rotors since I drive like I stole it. 2009 Jetta driver.

I had the same problem with my c8 z51, I switched to the Carbotech 1521 pads and they solved the problem. Would definitely recommend

I had an issue with severe brake dust from the OEM pads on my Z06 Corvette. I replaced the pads with Carbotech 1521s and the dust was eliminated. Made a huge difference with keeping the wheels clean and the pads preformed better.

Carbotech has served me very well on my M6

I run carbotech 12/10 on my C5. Streetable but messy. I only really drive to track, on track, then home. Probably drive 100 street/leisure miles a year, but after 2 track days on this setup (wilwood aero6 in front) I’m very happy with the setup.

I'm liking the Carbotech 1521 pads for their better heat tolerance and modulation over OEM pads, though I feel light initial bite is slightly less.

I replaced both my front brake discs and pads a month ago and have driven about 1075 miles. On the passenger side, one of the grooves has gone but the other remains and I feel like its getting worse although not 100% sure.

Vanno verificate le pinze, c'\u00e8 sicuramente un problema di scorrimento.

I used Carbotech brake pads, but they dust and squeal like crazy, so other options may be better.

I ran into some brake issues. The pedal started getting squishy even in wet conditions. It never got dangerously deep, but it was still unpredictable. In the last session, the track dried up and I was able to push. I experienced somewhat serious fade. I had to absolutely stand on the brake pedal to get the car stopped. After pulling into the paddock and circling around to let the car cooldown, I still smelled brakes for the next 20+ minutes. The pedal firmed up on the way home.