Brake pads Carbotech or Ferodo

I've been to 20 track events to this day I'm still running OEM calipers. Just carbotech pads. You don't need a big brake kit at all. The oem cracks because of improper cooldown. I learned that after a session to take my cooldown lap seriously and ever since then i stopped cracking AutoZone rotors

I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.

I ran stock rotors for a long time with carbotech xp10/8, front brake ducts, stainless lines, and Motul 660. The XP10/8 + ducts was sufficient for 20min session the tracks I drive.

Ferodo DS2500 are a classic high performance street pad, every time I go through a set I am sure something better must have come along and do some market research, always end up back on the DS2500´s as an everday/occasional track pad. They are cheap and they last forever (really) relative to punishment taken, they are dusty though, that´s really my main issue with them.

If you can't find ceramic pads, get Ferodo Premium Eco Friction.

I'm using carbotech xp8 on my 3800 pound sedan. They've survived 6 days at the track plus occasional driving around town for a year.

I’ve been using the pads for at least 15k miles on my 2015 evo, haven’t had any issues. Stops perfectly

Ferodo DS2500s were a popular autox/light track pad back in my Subaru days, they did well for me.

I track the car and use the DS2500 pads with DOT 4 brake guild. Let me tell you this from personal experience, the stock pads fade real quick. After 2 sessions or so (15mins sessions), the brakes get real spongy.

I ran into some brake issues. The pedal started getting squishy even in wet conditions. It never got dangerously deep, but it was still unpredictable. In the last session, the track dried up and I was able to push. I experienced somewhat serious fade. I had to absolutely stand on the brake pedal to get the car stopped. After pulling into the paddock and circling around to let the car cooldown, I still smelled brakes for the next 20+ minutes. The pedal firmed up on the way home.