Brake pads Carbotech or Centric

When I had my mini cooper, I ran the 1521s on stock rotors and never had any issue in the rain.

Centric Posi Quiet Ceramic is what I use. No dust and quiet too.

I have run the Carbotech 1521 on the street and can confirm they are low dust and noise, but not the most performance oriented.

I just changed my pads and rotors at all four corners asI was always very unhappy with the stock pads and rotors; mostly because of noise in the cold and the amount of brake dust the pads made. Upon inspection of my rotors, with barely 30k miles on them, there was a startling amount of material removed and channeling from the pads. I would totally recommend you replace the rotors at the same time. I too went with the ECS slotted and drilled rotors with Carbotech 1521 pads and love the setup. Very quiet, very little dust and good performance.

Carbotech Pads (F-CT682 & R-CT340 1521 Street Compound)

Carbotech XP12's are going on for this season with RE-71R's, went with XP8's before and should of done at least XP10's

I stand by Carbotechs. Whether it's my S2000 or heavy E90, they've done great is hard lapping all day long. Depending on the car, XP10s in front and XP8s in the back work well for most. You can call them and they'll recommend the right pad. Their super noisy for street use but brilliant on the track.

2500 pads are a great pad, I dd those and have tracked with them. Carbotech makes great track pads that can be driven on the street, have a set on the Z06 and they take a beating at the track.

Pads: there are lots of options, of course. Generally speaking, the better performance a pad offers, the harder it will be on rotors. I like Pagid a lot, as well as Mintex. Akebono makes some nice ceramic pads that offer no dust and reasonable performance. I prefer a really aggressive pad. Most people underestimate that the pads are your biggest, easiest brake upgrade. My favorite pad is Carbotech. They are out of NC. The panther pad is almost a race brake pad. Constant squealing, lots of dust, and you have to warm them up to get them to work. But when you step on it, you're thankful for seat belts.

I have just put posi-quiets on my PP GTI and I'm experiencing vibration while driving at highway speed (68-80 mph, worst at 75ish). Re-checked torques and the faces of hubs/wheels were clean. Will go in for a balance but is it possible I got a **** rotor or something? Possible I have a bent hub and didn't realize it until the rotors were swapped?