Brake pads Bosch or OEM Toyota

Genuine Toyota Brake Pads hindi naman araw araw pinapalitan yan and safety ang nakataya dyan. I’m not saying hindi maganda yung mga replacement brands pero by using Genuine Toyota Brake Pads 100% sure ka na ok ang quality yun kasi ang binabayaran sa Genuine parts yung peace of mind na pumasa yung parts nayan sa standards ng Toyota.

Sa mga brake pads specifically may mga replacement brake pads na naninira ng brake rotors.

I have a 2007 Prius. Bought it with 120,000 miles. Got 365,000 on it. Never put brakes on.

I've driven a 2020 Prius Prime for 5 years now. Best car I've ever driven. Through 68,000 kms, I'm averaging 2.0L / 100km's. EV is programmed to not turn on below approx. -20C as a longevity feature. When temperature is below -8 the engine will turn on until warm enough to run EV efficiently.

I have a 2006 4Runner with almost 350,000 miles on it. Solid as a rock. All I do is change the oil and occasionally replace the break pads.

I used the Bosch Quietcast from Rock Auto. Works great for me as a daily and there is minimal brake dust.

After replacing the brakes with Bosch and tires with Michelin CrossClimate, over 30k miles later and brakes have at least another 50-60k life left, and tires too, since they have 80k miles warranty.

You’ll be good either way. Bosch is great

Bosch, Powerstop, Dynamic Friction, Brembo blanks, and Akebono are awesome alternatives.

Toyota Hilux 2018 185km- only thing i changed so far are tires, brakes, realignment(kapag lagi kang umaakyat sa pangit na daan) and drive train recently kakalaro daw ng shift stick.

I recently replaced all the brake pads on my 2020 brz performance package, and it now squeals way more than before and has a noticeable clunk when pressing the brake pedal especially after reversing. I got Bosch Ceramic QuietCast pads from Rockauto, used ceramic lubricant on the back of the pads and all contact surfaces, and silicone lubricant on the pins. Once I apply a good amount of pressure to the brakes, they're very quiet for awhile but eventually start squealing again. Also I did do the bedding process and it didn't change anything, plus that wouldn't stop the clunking.