Brake pads ATE or OEM KIA

I used ATE ceramic pads on my mk7 pp and so far they are great. Barely any dust, no noticeable wear on the rotors after 3k miles, and no extra pedal pressure required.

I have a 2015 Kia Soul I bought new. In over 9 years, not a single thing has gone wrong with it - no repairs of any kind. Just oil, brakes and tires.

stick with ATE or akebono. both good for their price. have ran both on my e39 and they work great with their respective rotors

FWIW I wound up with those Brembo front and Zimmerman coated rears with ATE ceramic pads and I’m very happy with it. To me the stock setup is grabby at low speeds and these are much smoother. I don’t feel like I’ve lost any stopping power. Huge difference in brake dust.

I literally just did exactly this.. Had the BRAKE warning light on the dash and replace rear brakes on Idrive message on my 2019 X3 M40i at 32k miles.. rear rotors looked fine to me.. they were smooth and not grooved.. so i bought OEM ATE PADS and a BOWA rear brake sensor.. $128 shipped from Pelican parts and i was charged 1 hour of labor ($135) at my local Indy shop.. as others have mentioned youtube is your friend.. just a rear pads replacement is a pretty easy job w basic tools.. I should have done it myself but I decided the $135 cost was not worth my time and effort.

During this time I also replaced the brake pads with oem ATE one’s (low dust) and oem brake fluid flush.

Regular carbon ceramic brake pads, from Ate and I presume also Brembo, are better than normal pads. Same stopping power but much less heat generation and brake dust.

Lastly, I had the well-known brake pad deposit problem on the rotors, which over time (about 5-6k miles for me) would cause the steering wheel and car to shake a bit when breaking, similar to the feeling you get when the rotors are warped. I had the rotors cut once, then all four rotors and pads replaced, and then the front rotors were replaced again. As many other Stinger owners online have said, once they replaced the stock rotors and pads with a good set of aftermarket rotors and pads, or some even just machining their stock rotors and getting new aftermarket pads, that seems to have solved the issue for them.

The rotors/brake pads are notoriously bad. The oem pads leave uneven deposits on the rotor. Causes shaking while braking. Ive replaced rotors twice. Got better pads and drilled and slotted rotors. No issues since.

Factory tires are garbage, but good all seasons and it gets around in the snow fairly well. My rear brake pad that had little wear, fell apart while driving in the mountains around the same time ( not covered ), I have never seen or heard of this happening before here or on other vehicles.