Akebono here too, no dust or noise, pedal feels great.
I have been using Akebono pads front and rear for the last few years. They give minimal dusting nothing too crazy. The pads are decent compared to OEM
I switched to Akebono ceramic compound after about six months of trying the Hawk HPS street pads. Performance is on par with OEM but I was looking for something that has less brake dust.
+1 for Akenbono for 99% street usage.
The issue with the brakes is mainly from the oe brake pads which have no pedal modulation and act like an on/off switch. You can change out the front pads to Akebono Euro pads (fairly inexpensive) and it will provide actual pedal control of the brakes.
Vary rpm, don't max load, don't overheat, motor in gear when decelerating is good for the rings. generally keep rpm below 5500 for the 1st 500 miles or so but the odd move up the tach to there won't hurt anything. I change the oil somewhere before 2k miles to get the build contaminants and more significant wear particles out.
They sent out an email today that they are now stocking Akebono Brake pads, which are probably the best for any VW, very good quality and low dust.
I've used the cheapo Wearever rotors/pads from autoparts stores, and the Bosch Quietcast. Hands-down, as long as I can afford it, I will be using QuietCast if it's available.
On my heavier vehicles I've used Akebono ProACT pads and gotten better than OEM life out of them.
I replaced my brake pads front and rear today with some good quality Ceramic pads. I had just done the fronts a couple months ago but I used some Bosch pads that one of the parts suppliers gave me to try. They were supposed to be their best. They were quiet and smooth but produced crazy dust!
Write your review
Help others - share your experience with this part.
