Brake discs Centric or OEM Volkswagen

centric blank rotors is the way. they are the supplier for powerstop and many OEMs. im sure for other aftermarket companies too. they are top tier

get Centric 120 series rotors. Way more braking than stock and zero noise.

I use Centric rotors/drums and Akebono shoes/pads from RockAuto. They work fine, despite FUD on OEM for shoes.

I'd also recommend centric for the rotors.

My solution is to always use top of the line brake pads like PFC 11s or raybestos st43 and up.

The other thing I ended up doing is once I really started being able to push the car hard, I installed Porsche 911 993 air deflectors on the lower control arms and that increased airflow was just enough to let me get away with keeping the small brakes. This past weekend I was at VIR and I was getting up to 130 on the straights, even bumping up against the rev limiter in fifth before braking for roller coaster, and the brakes held up fine. That and $30 RockAuto centric rotors.

Rock auto it legit. The power stop bundle is nice. For my accord, I usually go with centric rotors and akebono brake pads.

I had the Centric rotors for both the front and rears. I'm replacing the rears Cemtrics next week which have 48k km on them with Raybestos Element 3s because they are highly recommended here and I wanted to try something different. I have a feeling my rear centric rotors have been ruined by the akebono pads which I think have gone down to the metal and are creating a groove in the rotor. Sad that this is all happening at only 48k km.

Non-PP, Centric coated rotors front and rear, Endless MX-72 front and EBC Yellowstuff rear, with ATE Type 200 fluid. They are fine for street and autocross but would probably not be good enough for the track.

I purchased a 2021 Jetta with approx. 14,xxx miles on it. After a 4 hour drive, I noticed what sounded like an extremely rusty brake rotor sound (metal/metal grinding) as well as the sound of an unbalanced wheel or un-evenly worn tire. A local VW dealership reported that both rear tires were showing major cupping and that the brake rotors were so rusted that they were pitting and would not pass VA state safety inspection.

I was fairly unimpressed that the brand new rotors out of the box have some surface rust. I suspect these have been on a shelf for a long time.