Brake caliper WILWOOD or Girling

When I did my mk2 VRT I used B4 passage parts, IIRC.

For brakes, I went with Willwood 4 piston calipers with 10.1in rotors and a disk conversion in the rear. So, now I can stop, and have a lil less scary ride.

I rebuilt my front and rear for maybe $60 total in parts. Just O-rings and cylinders, they don't really get more simple than this. It's hard to find parts for vented girling calipers since all the guys with solid rotors buy the vented disc calipers as an upgrade.

Switching to a lightly modified 1990 Volvo 240 4-pot Girling caliper allowed me to go to vented front rotors and EBC track oriented pads!

I run these calipers and track my s13. They are great. I heard from other racing guys that the 4 pots make the pads wear in diagonal; they switched to the 6 pots ans it solved the issue. They run slick tyres, i only use UHP. I use DTC60 from hawk. I have custom made brackets and hats, with 315 x 32mm rotors.

Yesterday I took my E30 (325e sedan) to a brake shop...Both sides got the discs a bit warped and brake pads were uneven, so I got them resurfaced since they were still thick and new brake pads were installed. Right side got corrected and free right away but left side was still stuck even with the new brake pads. ...We discovered the caliper slider pins were bended and got them replaced but still the problem persisted. Guys at the shop told me I needed a new caliper on that side since it could be bended and that's why with the new brake pads it gets stuck since they're thicker. I already got a pair of new ones but will replace them tomorrow. Replaced both sides and now they’re working perfectly fine.

I bought brand new girling calipers(33 bucks shipped on ebay c'mon!) Previously I ordered rotors from rockauto. Installing new unworn pads is impossible.not enough room.

Those would be the Girling G60 (not to be confused with the Girling G54 that came on cars with G60 engines). IMHO too heavy and, at least over here, totally overpriced for what they are.

I'm not a fan of the Girling 60 calipers due to the weight of them and also the scarcity of replacement parts (due to low production volume).

G60's didnt clear the 15's i bought. Went with smaller girling 54's with 11" discs instead cause I liked the wheels to much. Ive heard the g60's are heavy pos anyways.