Alternator VALEO or Duralast

I replaced mine with an oem valeo

Uma pesquisa no auto doc, tens alternadores Valeo entre os 230 e os 350.

Yesterday I replaced my 90A B brand alternator (thank you, previous 8 owners) with a Valeo 120 Amp unit. So far seems to be working fine with 14.15V to the battery at idle and with minimal or max power draw.

Id go with whatever fcpeuro recommends. Aka valeo, bosch (which are both oems)

I’ve never had an issue with a Duralast starter or alternator. However, honestly, I probably wouldn’t put one on my Lexus. I’ve generally shoved them into cheaper and simpler cars.

Autozone will give lifetime warranty on certain (duralast gold maybe?) alternators. I got the replacement very wet (dumb), and it died while I was driving.

The refurbished Duralast alternator has worked fine for a few months but the last month I started to hear belt noise and assumed it was related to the alternator. The last couple of weeks I would smell a new unknown burnt smell that smoked like either rubber or electronics which has led me to wonder if the battery/alternator fuses have gone out.

I got a alternator from AutoZone( duralast pos) and a new battery , same thing, car started with new battery ,voltage at the battery was around 12.5 and voltage directly on the alternator was the same exact voltage as the battery which showed the alternator still wasn\u2019t charging I took that alternator out got my money back and went to a reputable alternator and starter shop around my area and got a quality rebuilt one. They tested the alternator before they gave it to me and confirmed it was in working order. I installed it and still the alternator is not charging the battery , i checked voltage directly at the new alternator and still got the same voltage as the battry while the engine was running , so its still not charging the battery or producing power

Believe it or not, though I installed a brand new alternator(Duralast gold) that turned out to be bad from the start and I had to replace it again(so I guess what I’m saying is check the tention on your belt, but don’t rule out the new alternator as - also - being bad), been 2 years since tho.

I purchased a Duralast 115A Alternator 14921 (remanufactured) which, once we moved the pulley and fan from old to new, it mounted up without a hitch. Once the battery was charged I connected everything up and she started right up. However, the voltmeter was hanging around 12V so we put a multimeter on the battery and only saw 12V+/-.