Owner reviews for brake pads

Front Golf R OEM Brakes include: TyrolSport Stainless Steel brake lines TyrolSport Caliper Stiffener kit (re-lubed every year - had them on for 4 years, re-lubed 3 Times, so good condition) Hawk HPS pads The above parts were installed at about the 24k mile point, so have about 24k miles on them.

I replaced REAR pads and rotors myself at the end of June of 2017 when I was at 54,000 miles. I used Bendix Ceramic Pads / D1348: https://www.carid.com/bendix/cq-ceramic-rear-disc-brake-pads-mpn-d1348.html These should fit your CC as well (they fit 2.0T and VR6 )They run very clean - like no dust, like the original factory pads did (maybe cleaner). I also opted for oem style rear rotors. Nothing fancy, no slots or drilled holes. The originals didn't have these features and I found them totally serviceable without them. If you buy aftermarket standard style rotors, just be sure that they match the specs of the original factory ones. For my car, the VR6 has rear vented rotors (the 2.0T has solid unvented). I confirmed the vane count and the rotor thickness matched the originals when they were new and then made a decision. I think the rotors I got online were duralast? I can't quite recall. Anyhow, I'm sure I'll be shamed for not going to the VW parts counter for VAG branded parts. But with that said, I have over 2500 miles on since then and the car stops beautifully with zero pedal pulsation. All-in, with a tube of compatible brake grease, I think I was at about $115 in parts and 2.5 hours of my labor.

I've got factory Brembo's on my 2014 Jeep GC SRT...it took some getting used to when driving as the brakes are very responsive!

2000 Honda Oddyssey

High mileage but runs good, small dent on driver's quarter panel. Rebuilt trans, shifts good, engine runs great just had valves done. A/C doesn;'t work probaly needs freon. 3.5l v6 automatic. Aftermarket radio HAS AUX JACK. New headlight lenses, new intake tube, new break pads

Actually just installed a set in my MK6 GLI and they are a whole lot better than the OEM branded pads.

Love the pads, don't like the squealing at times, but for a high torque pad it's really good. They have the same feeling at Hawk DTC's which I use on track, but have that strong bite at a MUCH lower temp. than the DTC's do.

Noticeable braking distance reduction, but they do produce more dust than stock.

There is a noticeable difference between OEM pads and these along with high temp brake fluid when doing 20 min sessions at Portland International Raceway... less fade and shorter stopping distance. Also the pads are still quiet and about same brake dust as OEM.

Fantastic engine & brakes. I think they're very good looking cars, too. Mine bit me hard though, and I'd never own another.

We had really bad luck with EBC yellows, had a pad seperate from the backing plate, then the next set warped after one track day. Never again.