Oil filter Motorcraft or OEM Honda

5000 miles, full synthetic, Pennzoil Ultra Platinum. Do it myself to make sure it's done right. Use the Motorcraft OEM filter.

I still recommend the OEM oil. I have a mechanic that let's me provide my own parts (if I wish) for a job at no cost. When he does my oil changes I provide the Motorcraft Oil and Oil Filter.

When I did the change at home-used the motor craft filter FL190S and mobile 1 full synthetic for $35.00. Biggest pain at home is removing the panel under the chassis.

Personally I’ll ONLY use the manufacturer filters on my vehicles and I’ll look through the catalogs to find the largest filter that fits. I’ve been using Motorcraft FL1As on my pu for the 28 years I’ve owned it and it’s cheap insurance.

I've always had good luck with the FL 820s in a 3.0.

For oil filter, I run the same one on my 302 and 390: Motorcraft FL-1A. I believe it is (or was, at least) made by Purolator and is my go-to for my old Ford V8s.

After the A01's ceased production I moved to Bosch and Wix filters.

I don't have it all figured out, but whatever my mechanic tends to install causes the engine to run louder. The A01 filters were much quieter, even than A02.

I've used the A02 filter many times, and got them in bulk from Amazon. They're good. When I buy from the dealer, I get a 003 instead -- fewer holes, and made by Tennex instead of Honeywell. I find it easier to get A02 on the aftermarket at a better price, so usually go with that.

The A02 oem Honda filter is made by the same company that makes FRAM filters, Under the blue paint, it is identical to the FRAM/Honeywell Tough Guard filter Line. Decent filter. Def better options available though.

I had a 2002 Honda CR-V and the oil filter was mounted horizontally on the back of the engine. You had to reach through the RH front wheel well with the wheel removed or turned all the way to the left. Making a mess was completely unavoidable.