Jetta headlights
Never in my Mk7. But in the CPO Arteon, I got flashed at quite a bit. I adjusted them down.
I activated the DLA and euro functions of my headlights on my 2023 Arteon SEL Premium with a few clicks on OBDEleven. Works fantastic!
I’ve used TYC many times and no issues to report.
I believe I have these on my S70 and they've lasted several years now with no visible clouding or any issues whatsoever. Good buy imo.
In my case, about 1/2 to 3/4 CCW turn with philips screwdriver did the trick - now headlights aim just a little higher on each side… Importantly, I am not getting flashed by oncoming drivers while using the low-beam headlights.
TYC is perfectly acceptable. I will say I have used TYC stuff in other applications where the connectors felt a little cheaper than the Hella OE, and the fit was not quite 100%
Don't get TYC. My beam pattern is poor, and I had cast metal parts inside the headlights get soft and bend from the heat.
TYC headlights are trash and their sealant is the main cause of letting moisture in.
it's been driving me nuts that I've been getting condensation only in my passenger side headlight. They're brand new TYC aftermarket headlights and I have another friend with the same exact issue. Same brand, same side.
It's not leaking or anything. Just your typical condensation that doesn't go away lol. I've checked the breather valve (valve for venting the heat) and while it looks identical to the driver side, the holes are pretty small. I'm guessing it's not enough for the hot air to vent out, hence the condensation.
Write your review
Help others - share your experience with this part.
