Engine oil OEM Mazda or Pentosin

Mazda says every 7500 miles for normal duty OCI, and I’ve done every 7500 miles since brand new on my 2014 3z.

It’s now at 187k flawless miles, consumes no oil *at all* (I’ve literally never had to add oil beaten changes, ever, what goes in comes out every time), runs like new, seems easily headed to 250k.

For Naturally-Aspirated Skyactiv engines, it is highly recommended that you use Mazda's own(Idemitsu) high molly GF-5 0w-20. Arguably it is one of the best oil for skyactiv engines.

But then we replaced it with a SkyActiv Mazda3 that used 0w20 and proceeded to have a good long history with that motor that had 0 oil consumption in 125K miles; I did all of the oil changes myself and it was always 4.5qts in/4.5qts out every 5k miles.

For [Naturally-Aspirated Skyactiv engines](https://en.wikipedia.org/wiki/SkyActiv), it is highly recommended that you use Mazda's own(Idemitsu) high molly GF-5 0w-20. [Arguably it is one of the best oil for skyactiv engines](http://www.cleanmpg.com/community/index.php?threads/45295/#post-357910).

After talking to a European mechanic. He said u need Germany oil for a German car. American oil is trash bc of the EPA regulations. He recommended Pentosin. The tick tock went away and I've been using it every oil change

2014 3, 0W-20 full synthetic (whatever major brand is cheapest) from brand new, every 7500 miles.

170k, runs like a top, burns not a single drop between changes, compression and fuel mileage exactly the same as new.

I use Mazdas 5w-30 Ultra DPF. Mazda once said that this was the oil that they're using, so I guess what's used by mazda can't be too bad for the rex

I have been using the Pentosin in mine and have not had any cam issues after putting in a new cam.

Many reputable rotary shops have tested numerous oils over the years, and agreed that the bearings do not have adequate protection with 5w-20 or 5w-30, especially if you track the car or do any spirited driving regularly.

I encountered something similar when I took my CE Turbo in for service a few weeks ago. The invoice said 0W20 and when I asked the service manual why they used the wrong oil they told me “oh our technicians know what oil to use, ignore that.” Needless to say I have zero confidence that the correct oil was used.