Engine oil OEM Mazda or Eneos

For [Naturally-Aspirated Skyactiv engines](https://en.wikipedia.org/wiki/SkyActiv), it is highly recommended that you use Mazda's own(Idemitsu) high molly GF-5 0w-20. [Arguably it is one of the best oil for skyactiv engines](http://www.cleanmpg.com/community/index.php?threads/45295/#post-357910).

I use Eneos on my 2013 WRX since day one.

Mazda says every 7500 miles for normal duty OCI, and I’ve done every 7500 miles since brand new on my 2014 3z.

It’s now at 187k flawless miles, consumes no oil *at all* (I’ve literally never had to add oil beaten changes, ever, what goes in comes out every time), runs like new, seems easily headed to 250k.

For Naturally-Aspirated Skyactiv engines, it is highly recommended that you use Mazda's own(Idemitsu) high molly GF-5 0w-20. Arguably it is one of the best oil for skyactiv engines.

I have used Eneos 5w30 in it since I bought it. This is a group 5 oil and I believe that it saved my ass. Last summer going to work my car blew the top radiator hose off. I was about 3 miles from work and so I decided to just drive it. The temp gauge was pegged all the way. Come to find out my radiator inlet broke since it was plastic. I was able to get the hose back on after work and filled it up with coolant. Replaced the radiator with an aluminum CSF two row and knock on wood everything has been good since. Not losing water or oil and no smoke coming out the tailpipe or anything.

But then we replaced it with a SkyActiv Mazda3 that used 0w20 and proceeded to have a good long history with that motor that had 0 oil consumption in 125K miles; I did all of the oil changes myself and it was always 4.5qts in/4.5qts out every 5k miles.

I’ve had a few oil samples analyzed of ENEOS and the OEM 0W-8 and the results are promising at 3k intervals.

For [Naturally-Aspirated Skyactiv engines](https://en.wikipedia.org/wiki/SkyActiv), it is highly recommended that you use Mazda's own(Idemitsu) high molly GF-5 0w-20. [Arguably it is one of the best oil for skyactiv engines](http://www.cleanmpg.com/community/index.php?threads/45295/#post-357910).

Many reputable rotary shops have tested numerous oils over the years, and agreed that the bearings do not have adequate protection with 5w-20 or 5w-30, especially if you track the car or do any spirited driving regularly.

I encountered something similar when I took my CE Turbo in for service a few weeks ago. The invoice said 0W20 and when I asked the service manual why they used the wrong oil they told me “oh our technicians know what oil to use, ignore that.” Needless to say I have zero confidence that the correct oil was used.