Brake pads Zimmermann or OEM Honda

I remember somebody talking about swapping out the Brembo for Zimmermann brakes and he was much happier with those.

The pad material composite can be upgraded to extend mileage adding replacement parts like Bosch or Zimmermann (OEM suppliers) that are the same or better than stock.

These new ceremic pads can last pretty long. My Honda has almost 70k miles and still plenty pads left.

I did them 6 months ago. I used import direct rotors from o Reilly. and some brake pads from NAPA I think I used Zimmerman brake pads. I have 0 problems with them and only need to do my rears in a couple of months according to the wear sensor.

Two rotors=$100. Set of pads about $50. Couple wrenches, jack and jack stands.

All 10th gen civics do this.. 10th gen accord, and we've noticed it on some 11th gen civics, too... There was an updated pad that's supposed to help with it..

Zimmerman blank rotors are a good street replacement. No need to pay for drilled/slotted rotors. Personally I went with ceramic brake pads. They don’t bite quite as hard as metallic, but they still bite well, don’t make as much brake dust, and they don’t seize to my rotors after they get wet

I had rears replaced at 40k. At 60k now. I’ve always had a rumbling sound and vibration when breaking from 60-55 mph (around 57) since 40k.

Seeing what looks like a Prelude wheel, why not just get the OEM honda brake pads? They are acceptable for most daily use, and the brake dust isn't to terrible to deal with

my 08 Accord went through rear pads every 18-20K miles. They were way too soft.