Brake pads WAGNER or JURID

The best pads out there right now are the Wagner OEX pads cuz they're built on a galvanized steel backing plate with a mechanical fastening system for the friction material instead of glue. They don't rust out like plain steel pads

The Jurid pads did work. They were 13.8mm that seems to be the key.

Wagner OEX brake pads are some of the best around. They're built on a galvanized steel backing plate to reduce rust and the pad material is connected to the plate with a mechanical attachment system instead of glue. Wagner is a Tier 1 supplier to several carmakers.

Wagner, Centric, Raybestos, Akebono are all very reliable brands. However, each one makes an economy, OEM and premium version. So don't go by brand name alone. Wagner OEX pads are premium quality. They're built on galvanized steel backing plates with mechanical attachment versus adhesive to keep the friction material on.

I put Wagner on mine. They have been good for around 35k miles on them so far. I don't see me replacing them for another 15k. I didn't like the OEM one and braking is really one of the weakspoints for the Mazda 6.

I highly recommend Wagner OEX pads. Galvanized steel backing plates. Quiet. Long lasting

Good braking, squeak free, low dust. The OE pads are great. They have good initial bite, no noise, high quality but they are semi-metallic so they make a bunch of dust. There are ceramic pad options that are low dust but they can be squeaky and won’t perform that great until they are warmed up. And of course you can get bargain bin organic pads which will have low dust but won’t perform nearly as well as stock. It’s a trade off no matter what. I went with the OE Jurid pads. I’d rather clean my wheels than lose braking performance or deal with noise. Also keep in mind that the rotors matter with noise and dust too.

Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.

When I picked her up, I was told my front and rear brake pads are all down 1mm already. At this rate I’ll likely need to replace them around 15k. I thought this made sense for the front pads since they’re the JURID high performance ones, but the rears being worn that much seemed strange. I don’t drive fast/brake hard/etc, never track, or do anything otherwise that should wear my brakes prematurely.

Volkswagen uses Jurid and Pagid Black compound brakepads as OEM on our Passats. The problem is that these pads take a very long time to correctly bed into the brake rotors. If these pads aren't bed correctly, over time they will wear unevenly on the rotor which causes vibration. That vibration is what causes your brakes to squeal!!