Brake pads TRW or ENDLESS

I got the ceramic TRW pads from FCP euro. You can find them from ShopDAP, VW dealership, etc. There’s multiple OE suppliers that all work great: TRW, Pagid, Textar. You can also go for the semi metallic equivalent if you want a little extra bite. I believe they all come with the wear sensor, you can simply cut it off at the base and pull out the wire. I’ve done this twice now, no problems. I suppose you could use the advance auto ones if you already have them, but just know they probably won’t give you as much bite as the stock pads, and may end up causing some warping over time since they aren’t designed for the heat temps.

I replaced the pads on with Endless MX-72. Similar progressive bite to OEM, just more and WAY more thermal capacity. They feel like the ultimate brake pad. Using OEM rotors, I've had zero \"warping\" since switching over. This leads me to think that the rotors aren't actually warping but the nature of the OEM pads leads to pad deposits on the rotors. I get close to 60,000 Miles out of a set and have never considered another pad after discovering them.

I just put on some Endless MX72s. But they are for performance street and occasional track use. And they are not cheaper or probably less noise. But I do expect a great deal better wear with them than stock.

Job got done in about three evenings Biggest time sinks were figuring out how to use the caliper piston compression tool and getting my overtorqued/rusted lug nuts off. Drove up from Maryland to NYC with no problems so I think I did the job right.

Not cheap, but Endless makes perfect street pads that last a long time, are quiet, very little dust, good cold bite, and high coefficient of friction and heat range.

I bought some Endless SS-Y's from FR-sport and they're way better than the stock pads in every way. They don't even cause dust.

I have the TRW TPC1633 ceramic pads installed, perfect fit (OEM) and brake as good as stock...actually smoother. Dust is reduced maybe by half.

TRW Ceramic pads, look identical to OEM, since TRW makes the OEM pads. Feel same as stock, way down on dust.

Finally got around to getting my brakes installed. I've barely put 10 miles on the setup, and the improvement is quite noticeable. Initial bite is improved, and much less effort is required for the same braking force.

Changed the front brake disc and pads (TRW brand) on my car (Opel/Vauxhall Astra J 2016) and noticed my car started to smell heavily burnt rubber after heavy braking when the car stops. I understood that brakes does this in the beginning but now it has gone s month and probably around 150km (100miles) and I also have made some emergency brakes from high speed to speed up this process. So two weeks ago I removed everything and really deep cleaned the caliper and checked the pads. From smelling the pads it seems like it is the glue between the brake pad and the anti squeak plate that cause the smell (?) I also checked the temperature of the brake disc after normal usage and they are all around the same temperature, so I doubt it is a frozen caliper. (Around 70c 155f) but still they smell, maybe a bit less.