Brake pads STOPTECH or GALFER

Stoptech Street pads for the Akebono brakes. I've only got 16k miles on them and they still look new, despite having drilled & slotted rotors. I do heavily downshift and engine brake, which explains the lack of wear. I'd buy them again as they're quiet, but they do produce a fair amount of brake dust.

I switched from oem to EBC slotted rotors and StopTech "Street" pads about 20k miles ago. I won't be switching back. Firmer and more immediate initial bite, more consistent brake feel, and no brake fade even when carving up the canyon. This with good lifespan for the pads, zero noise, and low dust. I do have to be mindful when braking in traffic though, as the pads took about ten feet off of my 60-0 stopping distance and the performance tires a few more, and I don't want to end up wearing the vehicle behind me. I have a '16 sedan and only changed the front brakes out.

Stop tech sports pads, from my experience it bites great. Same amount of dust as brembo. I have tracked them lots of times, great for daily too

I personally run the StopTech 309's on just about all our cars, even my SO's Sentra. The price is good, usually about the price of OEM or NAPA replacements. There's a good initial bite, but it's not overbearing. And most of all the modulate well - which is what you want for autocross pads.

I use stoptech sports. Great pad apart form being a little dusty.

I've swapped between Stoptech street pads and Carbotech XP-12 for a few years. The Carbotechs (race pads) would require some bedding in whenever they go back on the car. The rotors surprisingly lasted much longer than on the Carbotechs alone (I daily drive the car). I suspect it's due to the ideal working temperature of the Carbotech compound.

I went for Stoptech 309 sport pads since they are relatively cheap, and are comparable to ds2500. I only street

Stoptech Sport (aka 309). Quiet on the street and good enough for track days. The only downside is the dust.

If you are dead set on not getting some Napa golds or whatever grab some Stoptech Steet pads. They are dusty as hell and wear pretty quick not in stop and go city traffic. I live in the sticks so lots of highway and running the stoptech steets on my Gx sedan they dust up bad and I swap them every 35k~. I do have the sport brake kit on it but I don't see the base calipers making much difference on dust and wear.

I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.