Brake pads Raybestos or WILWOOD

I always recommend the Raybestos Element3 EHT pads and rotors. We use them at work and have very little comebacks. Low noise, low dust, great pedal feel.

I usually get aftermarket Raybestos pads if/when available.

I have Raybestos AT's(96087) on my front, and Hawk HPS HB418F.646 pads. Don't think Hawk makes the HPS pads anymore though. I'm at about 2.5 years on mine, got 4 years out of the last set, after putting up with the OEM's for 4.5 years. Still on the factory rear drums.

Far better than OEM.

So I don't work for Raybestos but I do install a ton of them. Those EHT are really good for normal vehicles. The price is right, dust is low, pedal feel is great, friction is about on par with OEM and in some cases better. They will survive about 10-15 medium effort stops, and about 3-5 Hard ABS stops. I wouldn't put them in anything bigger than a 7-Seater V6 Crossover, and the weight of those is on the limit of what the pads can do, but over all very good.

The brakes I got from them are the Raybestos Element3 pads and rotors. Working great so far!

I will move to Raybestos EHT or PowerStop Z23 or Z26 when its time. Wagner has Thermoquiets for those with ear problems.

I'd just buy any of the old line good quality aftermarket that are aiming at OEM. Raybestos, Bendix, Wagner. Or just buy BMW OEM.

AC Delco for electronics. Moog for suspension. Raybestos for brakes.

I don't know much about Stop-Tech, however, I have heard from a friend that used Wilwood that these perform best in non-Winter driving conditions. He said that over time they will not stand up as well as a Brembo set up. It might be worth noting what climate (Alaska vs California) that you spend most of your driving time in as well when factoring a BBK upgrade. I also noticed that you are quite new to this group so allow me to introduce you to the member who will derail all original posts into something else to the point where your thread may get locked up. See below. GoGo Golf R said: Ok let's try to agree on the following: 1) Upgrading the brakes is mostly justified for track driving purposes No, Personal preference. 2) Changing the brake pads will reduce dust for street driving Depends on your pad choice 3) Changing the brake pads, rotors and brake lines is pricy Subjective 4) The OEM brakes, while not totally ideal for every driving style, will suffice for average street drivers and some track drivers Depends on your driving style 5) Downshifting with correct rev-matching, will extend the duration and reduce wear on the brakes Yes because replacing your clutch is much cheaper than new pads :screwy:

So I mentioned to Mike at GiroDisc (who is great btw) that I was in the market for pads, and he recommended Raybestos ST43s, which get great reviews. So I went with them, but two events ago they put deposits on the rotors so bad the car shook like mad after a few laps. I still had the HT-10s with me, so I swapped them, they wiped the deposits off and I was back in business for the day.