Brake pads R1 Concepts or OEM Toyota

DIYer advice: buy Toyota pads/rotors from your local dealership's parts counter. Take a photo of your VIN for the parts guy. Once you're in their system, buying parts will be easy. You'll typically pay 20%-25% more for OEM parts, but do you really want to buy cheap pads/rotors?

They seem good so far. I'm not very handy and I was able to put them on pretty easily.

My oem brake pads, (‘23 A-91MT) are getting low ish after a year of driving her and going to the track. OEM ones seem expensive but they did last a hpde 1/2 driver a year.

I'm on my second one, a '19 Prius Prime I bought new has 507k miles on it today. About to do the first brake job on it soon.

I ran r1 concepts ceramic pads and rotors on my mk6 and they were awesome for all 4 for under $450 with a 20% off coupon on their website

Rotors were getting rusted decided to have them replaced with R1 Concepts Brake pads and Drilled/Slotted rotors. They perform a little better than the OEM with a quicker breaking point.

2012 Prius, 202k miles, still with original brakes.

2017 Prius Prime, 110k miles, still with original brakes.

Both inspected annually by our mechanic. Both still going strong.

based on the inputs so far, I have decided to take the Sequoia (price: around $5000, he takes care of the brake pads and rotors.

OEM. Though they do produce quite a bit of dust.

This happened to my Gen2. I gave it to some guy to change pads and these lights came out after. I think he didn't do it properly and air entered into the line. I then took it to a local Toyota dealership where they fixed it. (I don't recall what they did exactly, maybe flush and replaced the break fluid). I was fearing it was the actuator, which as other have posted, is very expensive on this Prius. I had to drive very slow and careful, because I had no power in the brakes, so they were hard and slow. No ABS. No regen either.