Brake pads R1 Concepts or Hawk Performance

I have Hawk 5.0 pads with KnS standard rotors and they've been pretty great so far.

I’d used hawk ceramic pads especially since you don’t plan on tracking the car. Low dust and will keep the wheels looking good between washes

They don't even squeal as much any more

Hawk DTC-60 pads are the best value performance pads I found. Stock blank rotors are fine, I upgraded to a 335i sport caliper set and its been more than sufficient for many track days

Got them on. Lasted for a good amount. 20k miles. Weekend track slowing from 160mph+ don’t use ceramic pads something softer would be better

EBC for occasional track and daily pad. HAWK DCT60 is what I’m running. Stops so good!!

I ran hawk hp+ pads last year before starting my first track season ever. After 7-8 track days, driving to and from track, and the occasional fun drive on the street. About 10k miles later, I swapped them for fresh hp+ pads for this year. Comparing the old vs fresh pads, I used about 50% of the pad.

I use Zimmerman rotors and Hawk HPS pads on all my Audis.

I swapped from the ake’s to hawk on the last pad change. Hawks definitely don’t have the same stopping performance as the stock ones. I hate the dust from stock, but they work so much better Wouldn’t say the hawks were unacceptable by any means. Not worth the trouble to pull them out, but won’t be using them again

That's normal for those. I have been through 3 or 4 sets now and to be honest, I think I'm done. After COVID they just seem to be very unpredictable. I've my last set did some weird stuff sometimes and my current set feels like it needs way more temp then it should. When I did a track day and put dtc60s on it, they gripped immediately on a cold stop where the HP+ felt like it needed some use. None of the other pairs have felt that way. The noise is also totally random now, the first couple sets would be loud unless they had heat, but the new ones are a lot quieter and sometimes loud.