Brake pads R1 Concepts or GALFER

Rotors were getting rusted decided to have them replaced with R1 Concepts Brake pads and Drilled/Slotted rotors. They perform a little better than the OEM with a quicker breaking point.

Got them on. Lasted for a good amount. 20k miles. Weekend track slowing from 160mph+ don’t use ceramic pads something softer would be better

Galfer pads and rotors. I'm 210lb and can confidently slow down with rival flat mounts and 160mm rotors

I have R1 on now all around and no issues since.

Running the R1 concept with ceramic pads now and have no issues. They bite a lot better then the stock setup I had on it before.

Galfer pro pads are the best ones I have ever used. They have more power, maybe same amount of modulation as shimano ones, they seem to resist fade better amd have ok life span.

I bought the r1 concept rotors+brake pads. They look great and have lasted for about a year no issue at all. Good quality

I have R1 Concepts on my daily R, I was fortunate to get them when they were on sale through their e-bay store. They work very well on a daily and the brake dust is very low. I really like them.

New rotors and pads without breaking in at all, just normal driving as soon as changed. Pads lasted 30.000km ish, while rotors wrapped at about 40.000km ish (pads replaced at 30k with same R1 concepts). Brake feel and performance was OK, but much worse than when broken in. Light squeal at about 15.000km and onwards. New rotors and pads following break in procedure, 10 stops from 90km/h (55mph aprox), never coming to a complete stop, then driving 30 minutes never coming to a complete stop, rolling to a stop on neutral and waiting another 30 minutes. Pads lasted about 40.000km ish, rotors lasted 80.000km ish, pads replaced at 40.000km with same R1 concepts ceramic.

I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.