Brake pads Project Mu or Mintex

I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.

I've been running the stock brakes with aftermarket pads for a few years and it's worked well for me. Mintex 1144, Ferodo DS2500 and Roddisons pads have all been great.

I used Mintex 1144 on my MK7.5 ST. Were great for fast road and some Nurburgring laps in a year.

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

Adam's front and rear ventilated rotors. Mintex front and rear brake pads. Motul DOT 5.1 Synthetic brake fluid. Goodridge G - Stop stainless steel braided brake lines.

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

I've got mintex in mine at the moment and they're not too bad, they weren't very expensive but they seem to do the job

I found Project Mu Club Racers to be decently streetable for a track pad. They do squeal a bit at less than 25 but are tolerable as long as they’re bedded in and you’re giving a decent amount of threshold pressure.

when i bought my girling 60 setup the seller threw in a set of mintex red box pads.....i hate them. i was never impressed with the red box's in other cars but on my setup they squealed like crazy when i was off the brakes. i too had the issue with the pads overhanging into the center of the rotor but i took a rolox disc on a die grinder and took a little off the inner portion of the pads. even after doing that they still squeal. plus theyre a real dirty pad and after about 10k miles i only have about 50% pad life left.

those are worse then stock.