Brake pads OEM Toyota or OEM Volkswagen

Looks like a good project. I would be concerned about what you described about the brakes. It could be alot of different things causing that issue.

Make certain your kiddo has GOOD brakes and tires.

One thing that I am surprised by are the brakes. They're still fine at 110k, and it's not like this 4,000lb beast has EV-levels of regen.

I'm now at 120k miles. Still have over 4mm on both the front and rear pads, and the rotors look fine. So that's at least 50k miles I'll get out of a set of OEM brakes, but I expect more like 75k. 6 speed hatchback if it makes any difference.

I can't imagine a situation where I replace them with anything other than OEM Toyota parts. They've lasted an impressive amount of time, rarely squeak, and don't make any dust.

I purchase a 2022 highlander brand new. Recently it hit 50k miles. Purchased pads... Only assumed they needed them. Broke everything down to find they weren't even at 50%. Replaced them anyway - but they could have easily gone 80-100k depending on how I drove.

Is your corolla a hybrid? The hybrids have regenerative braking that will make them last a lot longer.

VW of macon charged me over 600 for just the front pads and rotors - that's with a friend's and family deal because my dad used to work there. Apparently the OEM parts are super steep.

From what I heard they changed the pads on the 2020 because people complained the 2019 pads were noisy.

Secondly, defective Rear Disk Brake Pads that wore out on a majority of 22` Taos which was a covered rear Brake replacement if it was under 2ydears and 24 months. I just missed the cut-off and was$700 poorer.

My front brake rotors warped at ~12K miles. I had them machined and they lasted about another 12k until I replaced them with aftermarket Centric. Those lasted ~12K miles until they warped. At this time I went back to VW OEM rotors and they lasted ~12k miles. I had the OEM's machined, but now they are warped again. Along the way I tried some aftermarket pads, and generally had problems I purchased a pair at NAPA and they were sloppy in the caliper and would shift and click when applying the brakes in reverse. Went back to OEM on the pads and have no problems.