Brake pads OEM Toyota or OEM Chevrolet

I run a fleet of Camrys and use Toyota pads because I've found that they produce the least brake dust and I HATE dirty wheels.

I bought my 2016 Prius used with 32k miles on it back in 2019. It now has 157k miles and the maintenance has been a breeze. Just standard oil changes every 5k, 1 transmission fluid change, two sets of tires and I don\u2019t even think I have replaced the brakes yet ..no seriously I don\u2019t think I have yet.

Rear brake pads and rotors will not have an effect on nor cause a master cylinder failure.

Max automotive in surprise is by far the best place I\u2019ve found. Super honest, very fair pricing, will not upsell you or tell you that you need extra things done. The closest I got to that was when I took the car in once it was past due on an oil change which I had planned to do myself but hadn\u2019t had the time to get to. He fixed the issue I came in for (breaks I think) and offered to do the oil change for free, just charged me like 15 bucks for the oil. I have an EV now but if I still had my Toyota truck I\u2019d take it to him in a heartbeat

Just last year I switched out the original Yokohama tires for Pirelli and this year I switched out the original front brake pads. My mechanic said the rear pads still has life in them so deal with it next time. I thought it would cost a lot, but it was just Toyota parts so price was $120 or so.... and its going to be another 10 years before needing another change assuming similar driving habits.

Not a classic. I had an ‘84. First brand new car. It was a surprisingly good and cheap car for when I went to uni. Had to replace the brakes often. Thought it was the cheap car. In retrospect it was likely my driving habits.

Needs brakes and suspension. Need new pads and rotors front and back and new calipers front and back as well, car is from a rust state and are pretty rusty. Needs new shocks all around as well since they're blown. With parts no labor I priced everything around 800 bucks.

The brakes on that thing were absolutely horrible. If you had to panic stop it really was a panic. I never felt that sob was going to stop.

A couple of months after purchase the breaks starting squeeking and a 1 1/2 years later they haven’t stopped. I have had the front ones replaced but I keep getting told it is due to no copper in the break pads anymore - I call BS to that. I also had to get a faulty sensor replaced for the front end because it was causing my car to abruptly stop when I attempted to pull off from a parked position. It was thinking something was in front of me so the front end collision thing was kicking in. I’ve also had to get the fuel injectors replaced because they went bad while in a road trip this summer. Luckily we were almost back home instead 800 miles away still. Currently waiting for rear breaks to come in so those can be replaced to hopefully stop this squeak.

Bought a 2012 Toyota Sequoia from Heritage Motors on Shore Drive with a fresh inspection on it, So I personally figured it'd be solid, as Sequoia's are known to be pretty dependable. Not only was it a lemon/some huge issues, but the brakes were slapped together with bubble gum and hopes and prayers. The brake pad on the passenger side was installed backwards, which I was shocked it didn't make noise on the test drive