Brake pads OEM Mazda or OEM Honda

My 12 of this generation is at 222k miles with just oil changes and tires as well. One set of pads and rotors at 175k and still had life left.

Two rotors=$100. Set of pads about $50. Couple wrenches, jack and jack stands.

All 10th gen civics do this.. 10th gen accord, and we've noticed it on some 11th gen civics, too... There was an updated pad that's supposed to help with it..

I am easy on brakes. I coast to stops and don't speed either. I have a 2009 Fit. I swapped the front pads and rotors at 120,000 miles just because. They totally did not need to be swapped. I have since put 97,000 miles on the replacement pads and rotors. The ceramic pads I installed have plenty of life left. The rotors are near the end, but still work.

I put 68k on my 21 accord in about 2 years. Pads were all at 7mm. 80 percent highway, 20 percent city.

I inherited a 2011 cx7 from my parents who purchased this car new. They have always kept care of their vehicles. This is a non turbo model. Other than normal maintenance items they had replaced the AC compressor. Since I took it over in 2020, I replaced drive side front wheel bearing and passenger front caliper, brake pads all the way around plus normal maintenance items. 320,000km runs perfectly.

My cx9 was at 3mm on the rears at 52k. Get a caliper compression kit and it yourself. It's not very hard. I did my rears a month back in my driveway for $130.

Seems a bit sus - but it's not unusual for rear pads to wear faster than front on certain cars. My Ford Flex and CX-50 both wear pads faster out back (it made sense on the Flex because of long wheelbase but was surprised the 50 did it too). That said they should last twice as long.

The brakes - overheated on several occassions coming down mountain passes. This happened on 2 sets of brakes so it seems like a design issue.

In my experience the OEM Mazda Miata "Value" brake pads have absolutely horrible initial bite characteristics and require much more pedal pressure to achieve a given level of deceleration than aftermarket performance oriented brake pads.