Brake pads OEM FORD or OEM Honda

I am easy on brakes. I coast to stops and don't speed either. I have a 2009 Fit. I swapped the front pads and rotors at 120,000 miles just because. They totally did not need to be swapped. I have since put 97,000 miles on the replacement pads and rotors. The ceramic pads I installed have plenty of life left. The rotors are near the end, but still work.

I put 68k on my 21 accord in about 2 years. Pads were all at 7mm. 80 percent highway, 20 percent city.

Had this on our Ford Kuga £860. Did it myself although I already have all the tools for £280 all round.

For years my brakes on my CRV squeaked. My dad replaced them. A few other people/shops worked on them. Still squeaked. I'm talking YEEEAAAARRRRRS. I resigned myself to being *that person* at every friggin stop light. Needed new brakes again. Unique situation as it was, the Honda dealership ended up doing it. It was like $500 but they stopped squeaking!!!! It was heavenly to be a silent stopper.

changed my OG set at 120k currently just under 140k.

I have a 2016 ST3, 114k miles, OEM brakes at 6mm or so, I mostly do highway.

Seeing what looks like a Prelude wheel, why not just get the OEM honda brake pads? They are acceptable for most daily use, and the brake dust isn't to terrible to deal with

The brakes were so-so, and it had lots of torque steer, and benefited greatly from an aftermarket and much stiffer rear ARB, which improved its turn in and corner habits tremendously.

my 08 Accord went through rear pads every 18-20K miles. They were way too soft.

I can't believe the brakes used here, this is after all the 'Sport' model out of the Taurus lineup so therefor it should have received a better braking setup.