Brake pads OEM BMW or GALFER

My dealer charges about $1100 for rear brakes and rotors, and about $1200 for front brakes and rotors, so $2300ish total. I got all pads and rotors done at a local shop for about $1100, and transmission fluid (+ pan and filter) done for $750 at the same shop.

A common brake upgrade to the E34 5 series was to install E38 (7 series) brakes. Only downside is you also have to install larger wheels.

Galfer pro pads are the best ones I have ever used. They have more power, maybe same amount of modulation as shimano ones, they seem to resist fade better amd have ok life span.

My understanding is the OEM brakes have well-rounded performance. In spider chart terms, it would look like a round pizza with one slice taken off, and that would be due to dust. They still excel with high performance, solid longevity all at a reasonable cost

K12GT checking in. It’s the smoothest bike I’ve ever ridden. I wish the brakes weren’t made of wood but, I’m used to “quirks” of BMW’s now, after 200K on 1150 (RT & GS-A)

1st step, better pads for more initial bite and overall stopping power. Galfer HH can be had for $80 front and rear, you can spend a lot more on performance/track pads if you want the best.

My local dealer has the “value service” pricing on BMW USA’s website, front rotors/pads/sensors on an 18 330 x drive for $419.95 front and $435.95 rear.

My local Bavarian car specialist refuses to install ceramic pads and will only do OEM due to low performance in the cold and increased wear on rotors. I was looking forward to less brake dust, especially on the front, but I live on top of one of the steepest hills in the city. I now have OEM pads.

I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.

The brakes. Looks all OE. The dust is unbelievable awful.