Brake pads Mintex or Hawk Performance

My latest setup is below and works well for the handful of HPDE’s I’ll do each year. Fronts: Hawk DTC-60 pads

I'm running Hawk HPS pads with Raybestos Professional grade rotors. Got 5 years out of my first set, at 6 years now on the current set.

I have Hawk HPS pads and they work great on the street and produce way less dust than stock pads.

I ran the Hawk HP+, and had no complaints. Never did a whole lot of hard driving, but they held up in short bursts and were good for daily driving.

I’m a fan of the Hawk HP+ track pads! The bite and fade resistance is excellent. They’re a little squeaky on the street but not terrible.

For last Autox season I used the factory calipers. Hawk blue pads, motul brake fluid. Had no issues at all.

I swapped from the ake’s to hawk on the last pad change. Hawks definitely don’t have the same stopping performance as the stock ones. I hate the dust from stock, but they work so much better Wouldn’t say the hawks were unacceptable by any means. Not worth the trouble to pull them out, but won’t be using them again

Get some Hawk HP+ pads and you’ll restore the balance.

They’re noisy and nasty and will ruin the wheel finish, but they grab hard.

Hawk DTC-60 are known for tearing apart rotors. I went through 2 sets of OEM rotors on my m2 running Endless MS35 pads and I got the same grooving both times. Luckily without the vibration and shaking.

I am always happy using the cheapest ceramic pads I can find and the cheapest rotors I can find, no matter what car its going on. I have expensive Hawk Performance Ceramic on my STI and they're actually worse than the cheap stuff. Tons of dust and even some noise.