Brake pads Hella Pagid or Project Mu

Yes, decent enough. Just changed discs and pads on my Passat and no issues.

I currently have all four corners replaced with Hella Pagid on a 2018 Golf. I’ve had them on for 2.5 years and 60,000km. Love them just as good as OEM and I believe there are also a OEM supplier to VW depending where they’re sold.

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

Pagid is decent, I used them on my Cayman and it's survived 20 Laps of the Nurburgring and a track day.

I fitted a Pagid discs and pads (fronts and rears) to my Octavia vRS a couple of months back and don't notice any difference from the previous OEM. Paid £230 just for the parts.

I'm running the cheapest coated rotors from rockauto and Pagid "OE" pads and I'm happy with it.

I use Pagid RSL29s on my M3, I don't bother switching pads after events. They work great on the street but I'm in Texas so it rarely gets below 45 degrees here. They squeal but the dust isn't too bad. I don't daily it but I wouldn't have an issue if I did. The squeal is annoying but really not too bothersome to me even though I drive 95% of the time with my windows down.

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.

You'll need decent pads, and ones that can handle a car with a bit of weight behind it, think Pagid RSL29, Winmax W5 or Mintex 1166 if you're not going mad. You'll want to flush out your brake fluid and replace it with something that will take the heat as the tiny brakes on a 325i WILL overheat, its not a matter of if, its a matter of when, good fluid will stop you from boiling it and crashing!