Brake pads Hella Pagid or GALFER

With pagid discs and pads i have never had this issue.

Galfer pro pads are the best ones I have ever used. They have more power, maybe same amount of modulation as shimano ones, they seem to resist fade better amd have ok life span.

I put in Hella pagid. They are fantastic

I have Pagid RSL29 pads and ATE 200 fluid on Hankook RS4s -- I don't worry too much about brake fade unless it's peak Texas summer heat, in which case I'm managing engine and tire temperature with cool down laps anyway.

I had Pagid RS29s on my street driven but not daily driven car. They were great on track but holy shit the amount of noise they made on the street was almost agonizing. And the dust…. But for the feel they have on the track I would definitely buy again.

1st step, better pads for more initial bite and overall stopping power. Galfer HH can be had for $80 front and rear, you can spend a lot more on performance/track pads if you want the best.

Pagid RS29 are what I always used to run on my Cayman, and I loved them. Now I run Ferodo DS1.11 on my STI, and I'm a big fan of them too, but I'd still probably go back to Pagids if I went back to Porsche.

Pagid Yellows (also branded as RS29) is what I have on my 987.2 track car. If you want a track only pad, I’ve had great experience with PFC08, but I’ve used that on my BMW128i track car, so take that into consideration. Both can be used to/from track driving too. Just be prepped for a lot of squeal. Both are dusty as they should so be aware of that as well.

Honestly, avoid brembo. I think I have pagid on my golf GTi currently as they needed doing and I couldn't get anything else. I drive that hard and not really had any real issues unless really pushing it.

I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.