Brake pads EBC or OEM Hyundai

Just here to say I have them also, and they did quiet down. Remember these are a step up in the performance pad world so there are going to be trade-offs. They actually wish I had gone with a more aggressive pad but considering it's 99% street driving they are pretty great

Have you done some seriously hard braking to properly seat them? Go from like 60mph and hard brake down to 20 or a stop. Not so hard to activate the abs or lock em up, but hard hard. Do this a few times to help bed them in better. I have ebc reds and it seems like the dust does chill a little over time. They still have a heavy bite that not everyone appreciates when coming to the end of a stop. I kinda like it tho. Let’s me know they mean business. Would buy again.

I got their slotted rotors and red stuff pads. Installed them myself but had a strange kind of raspy grinding sound when braking. Figured it was just them breaking in. After a few days of this I decided to take the wheels back off and take a look. Turns out I had installed all 4 caliper clips backwards. Switching them around fixed the issue. Braking was pretty aggressive for the first week or two then smoothed out which they mention on the product page. Now it's quiet and smooth although more aggressive bite in then the oem pads, especially when cold.

EBC pads and rotors are good for normal or amateur competition use. As any other, just needs good bed in procedure. Their rotors are not drilled, which is great for normal street cars.

I use ebc pads and rotors. I don't see the point in spending hundreds or thousands more for galfer and the latest cool shit

Those are very good EBC pads, they also don’t destroy rotors. I will warn you that a brake bedding is absolutely critical with those. They very much rely on the transfer layer for better stopping performance and to not destroy your rotors. Thankfully, usually within 2 to 3 laps they have enough heat in them that you’re able to get a good transfer layer going.

They last me at least 3 days on brake-heavy tracks.

Those look a lot like EBC Greenstuff, I'm assuming a cheap copy - the EBC break-in coating on the front does work well and doesn't squeal but I work on the assumption that anything from Amazon is fake.

I burned EBC Blues up in a single day, decided they weren't up to it.

I recently purchased EBC BSD rotors and EBC RedStuff. The front rotors ended up with an unknown lead time, so the rep reached out and suggested DBA 4000 T3s. I dropped the car off at the dealership as they'd agreed to cover the labor under warranty. I stopped by yesterday and was told they were having some issues with the install and that the pads didn't come with hardware... the tech was already left for the day I swung by again today. I was told that the holes in the pads were slightly larger than the pins, which allows for the pads to shift up and down. I took it home and confirmed everything is good in one direction, but when I pop it in reverse and hit the brakes, I hear a metal to metal click as the pads shift up and hit the caliper. The same is true when I put it back in drive and hit the brakes.