Brake pads EBC or ENDLESS

You'll be fine with those pads, your final lap should always be a cool down lap and when you park your car never use the E brake. I use the same brake pad and have been tracking on them for 3 years now, 28 days on them last year.

I have them on my rear axel with slotted EBC rotors. No squealing what so ever with about 3,000km's on them so far. It was properly bedded so idk if that's why some folks are having issues.

I have ebc redstuff on my fiesta st. Best pad for the money hands down. With my car/community, they are the best pad for a DD with more grab and less dust than stock. They also last way longer.

I actually just put new rotors and redstuff on all four corners. I have not had any issues with them. Just make sure you bed them in. I think the only time they squealed was early in the morning when it was cold. After a couple stops at stop signs, I never heard from them.

Brakes - EBC. Tried others either didn't like the feel or they didn't last long, or made a mess of the wheels (I do a lot of miles daily) so stick with those now.

The "fitment" issues to my understanding and personal experience are more for the rears and is an easy fix. EBC powdercoats the steal part of the pad and as a result, the part that slide into the caliper can be just a fraction of an inch too thick. All you have to do is get a piece of sandpaper or a razor blade and remove some of the coating. That's it. I love the Redstuff pads...they grip good and haven't squeaked on me yet. Also the rears lasted some stupid amount of time for me even with some sporty driving. I think it was like 90k or more.

upgrading the pads is one of the cheapest most impactful upgrades you can make to the brakes . I have HH EBC pads on my MT09 and they feel fine but if you’re already changing them and you know you’re gonna spend a lot of time on the track just get the trackday/race pads

I used the HH pads for several years on my GSXR600. Eventually I started cooking the HH pads as my pace came up. I would get some hot spotting on the rotors where the pad material was melting and leaving itself on the rotor unevenly. When this happens your rotors will need to be media blasted or replaced to get them smooth again. A lot of it depends on your style and pace, but for the peace of mind I would recommend going for the better pads. They have a very similar feel but the EPFA is a little more consistent with less fade.

I have the epfa pads on my ‘17 r6. More power than my stock pads but not crazy in bite or max power imo. I’m a mid pack b group rider at best so yrmv. However, important to note, I took a trip to deals gap this fall and crossed the skyway in a cold light rain (45°f?) and the pads were not happy. First time I grabbed the lever and they had 15% of the power I was expecting, and took a solid 2 secs to build enough heat to do anything.

EBC are complete trash sorry. Street only use they are fine. Anything more than mild track use and they will fall apart. Carbotech xp8 would be your best option. Hawk black would be a good alternative.