Brake pads Carbotech or OEM BMW

Carbotech and dont look back, many proven won championships and leading modular pedal feel. I run them and love them !

I ran xp10s on a Jetta with no issues. They got really really hot, but no fade or loss of pressure. It was so hot it melted the tabs that held the plastic center cap on my wheel.

It has new brakes, oil pan gasket, VCG, new radiator, hoses, fan, fan clutch, water pump and a few other things I’m forgetting.

I run carbotechs on my GT350. Multiple weekends on them.

Been running carbotechs on my m2comp and C's and 2 seasons. Love them. Xp10 up front, xp8 for the rear. Track only pads that I can drive to the track with

I’m running Carbotech XP10 in my AP’s and the cold squeal is obnoxious. Once they’re really good and hot it goes away but it’s definitely just a trade off of good pads. Mine drag every so slightly when turning the wheel by hand but never enough I’ve been concerned about it. They still work very, very well.

I use carbotech xp10/8. I don't bother to switch. it makes a bit of noise if I street drive it too much but nothing really bad. it beds back in just fine after one or two warm up laps

OEM BMW Performance. Can’t recommend the brake pads though, dusty as hell. I had Hawk HPS5.0 pads before, those performed better than the OE pads with the added bonus of being very low dust.

I run carbotech xp8 on the front of my c5. Still a group 2 level driver. They’re a good pad for a car that’s driven to the track and home, but dirty and noisy at times for a street pad. They’re considered entry level track pads. I chew up rotors but don’t get fade, but my local tracks aren’t particularly hard on brakes

I used Carbotech brake pads, but they dust and squeal like crazy, so other options may be better.