Brake pads Bosch or Hawk Performance

I used the Bosch Quietcast from Rock Auto. Works great for me as a daily and there is minimal brake dust.

After replacing the brakes with Bosch and tires with Michelin CrossClimate, over 30k miles later and brakes have at least another 50-60k life left, and tires too, since they have 80k miles warranty.

After researching, I'm going to go for the Hawk HPS 5.0 next time I go to the track or wear my current ones down. From what I've read, it's a comparable to the oem feel, but produces less dust, which sounds really nice for my occasional trip to the track and for keeping my wheels clean.

The rotors I used are DBA 4000 series T3, and pads are HAWK HPS 5.0

Once your stock brake pads are toast as well I’d upgrade them to something like Hawk’s HPS 5 pads.

You’ll be good either way. Bosch is great

Bosch, Powerstop, Dynamic Friction, Brembo blanks, and Akebono are awesome alternatives.

I really like my hawk er1’s. They work whether they’re cold or hot. I daily drive my rx8 during the summer, and drive to track days and autoX. They are squeaky and pretty dusty

WRT the Hawk Pads… I’ve run both compounds and for a beginner you’re not going to notice the difference. They’re both good track pads. Do not run them on the street or if you do try to minimize the time you are on them and know you will have horrible stopping distance when cold.

I recently replaced all the brake pads on my 2020 brz performance package, and it now squeals way more than before and has a noticeable clunk when pressing the brake pedal especially after reversing. I got Bosch Ceramic QuietCast pads from Rockauto, used ceramic lubricant on the back of the pads and all contact surfaces, and silicone lubricant on the pins. Once I apply a good amount of pressure to the brakes, they're very quiet for awhile but eventually start squealing again. Also I did do the bedding process and it didn't change anything, plus that wouldn't stop the clunking.