Brake pads Bendix or Project Mu

Depends what you're after. If just street with some spirited driving, smething like pmu hc+ or ns400 works. I do track work and used to run hc800s, but got hc+ thinking they are the same. Only 600c rated instead. But, good cold performance, and extra good performance hot. So, they don't wear out super quickly while daily driving. Got quite a lot of track days and driving out of my original hc800s with t3 rotors. But, they are harder to find. Need to get the shape from pmus website, and then find somebody that stocks them. Rhd japan may do

I got Bendix rotors and Bendix ceramic pads from rock auto reasonably priced. Works very well

I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.

Shoot, I turned the rotors and got Bendix pads from RockAuto. Stopped great and smooth.

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

I’ve been using Bendix metal king for my car, it outperforms stock pads from Toyota by a lot. For context, I’m from Sabah; under normal driving conditions and without another driver in front basically keeping their foot on the brake pedal. Our steepest mountainous road is Kimanis, gradients ranging from 10% to 25%; it handled the descend perfectly without fading as compared to stock pads. Traversing to-and-fro Kundasang was also a breeze, brakes would typically fade half-way down the mountain with minor traffic ahead. I’m looking to switch to Bendix Ultimate come time to change my brake pads. Though I have to agree with the brake dust, but if you wash your car once a week then it shouldn’t be that awful.

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

On the surface this looks fine, but w203s don't have fancy brakes. Bendix's for these are only $50-90. So they've hidden a lot of labour in that "pad" price. then they've charged you half an hour to change the discs as well. if the calipers are off the discs take about 1 minute each to change. Then did the discs really need changing? these are basic brakes. you can go 2 for 1 on discs to pads on these no problems. it may be they did need doing, but it may be they didn't. So, I'd say, it's not a rip off, compared to say a Stealer, but there is still a bit of fluff in this.

During braking po maingay like sumisipol pero minsan naman hindi lalo na kapag maulan pero depende padin. Had my breaks cleaned, from pads to cleaning talaga like baklas. Ang gamit ko po is bendix na brake pads, makapal pa po pads.

Driving a Saga MT 2024. Switched from the stock brakepads to Bendix Metal King's. Drove up and down Genting roads quite often, but damn, the braking grips are not what was advertised, and made worse during rainy days. Luckily I drove a manual transmission saga, so I could balanced out braking hard with employing low gear, to cater to a proper sudden stop, especially going downhill, with all the speed bumps up there. And the brake dust? Lord! It's like I painted my wheels with paint, each time I got home.