Brake pads Akebono or Mintex

I use my s4 for dd, and use Stoptech cross drilled with Akebono ceramic. The lack of brake dust is unbelievable, and this set up generally gets me tons of miles out of them

I personally use OEM rotors direct from Mercedes and Akebono ceramic pads to eliminate brake dust. Those work just fine for me.

I just replaced all four corners with Zimmerman rotors and Akebono pads. Much reduced dust.

I have OE rotors with Akebono Ceramic pads and they're perfect. Dust is no longer an issue and didn't sacrifice any noticeable stopping power over OEM.

I put in Akebono pads and they worked fine on my 9th gen. Fantastic pads.

The OEM Toyota brakes are made by Akebono, however, you can use a quality aftermarket set and you'll be fine.

All 4 brand new brake rotors + pads + fluid – OEM spec ECS rotors w/ Akebono ceramic pads ($1100)

the concept shown at SEMA receives several modifications such as a Garrett G25 660 turbine with Manley pistons and Eagle whiskers. As if it were not enough this Sentra model would be equipped with Akebono brakes from Nissan Z.

On any modern BMW model those pads make the pedal noticeably softer, to the point where it almost feels like air in the lines. I've swapped many sets out due to clients being unhappy with the feel. Works fine on older ones though.

when i bought my girling 60 setup the seller threw in a set of mintex red box pads.....i hate them. i was never impressed with the red box's in other cars but on my setup they squealed like crazy when i was off the brakes. i too had the issue with the pads overhanging into the center of the rotor but i took a rolox disc on a die grinder and took a little off the inner portion of the pads. even after doing that they still squeal. plus theyre a real dirty pad and after about 10k miles i only have about 50% pad life left.