Reviews of NGK parts For Business

I run usually one of 2 brands. Brisk or NGK both iridium. And both are 1 step colder than stock.

Last time I went Bremi coils and NGK Laser Platinum plugs.

Installed the NGK rs7 plugs and it runs fine. I kept them at factory gap, which was, if I remember correctly approximately .028.

I just hit 40k miles and went with the NGK (RS7) plug gapped to .024, and the RS3 coil pack upgrade. The initial results after install was underwhelming. Car ran a tad smoother, but that's it. Since the benefit of the RS3 packs were to provide a more intense spark, I tried a wider gap ~.028-.030 Man it woke things up! Revs "effortlessly" and pulls hard from top to bottom.

Bottom line: you can't go wrong with NGK. Can't really go wrong with OEM Bosch either but I'd just stick with NGK and make sure you gap them right, call it a day. I'd avoid Denso.

Change the spark plugs too while you are at it, with NGK BKR6EIX plugs (or BKR6E if you want to save money but these are the copper plugs and will not last as long as the iridium BKR6EIX).

changed out some spark plugs, shop here: http://autotech.com/passat/b6-3-6l-2006-2009/3-6l-vr6-ngk-spark-plug.html also I decided to get a new valve cover (comes with new gasket, bolts, bolt o-rings, and of course a new PCV oil separator that are prone to fail)

I used NGK Iridium.

I have replaced the four spark plugs with properly gapped VW (NGK) plugs and still the #2 misfires cold and randomly thereafter. The original ones looked quite normal actually - chocolaty brown. Very little wear and a .032" gap.

I used the NGK plugs once and kept getting a pretty bad hiccup under hard acceleration.