Brake pads Bosch or Bendix

Bosch Quietcast pads. They have good stopping power, are quiet (so far) and have low dust, so they are great for my daily driver.

I was tired of the squeals and replaced the front brake pads with Bendix parts for about $90. Fits perfect.

I used rockauto and got.

BOSCH BC433 ceramic Brake Pads on my front brakes.

They have been real good.

I've been using Bendix pads for 2 decades and they always last a long ass time

I also have those Bosch pads on my Tundra and they are really good, quiet, low dust, excellent overall.

I think the Bosch pads work fine.

Last year a shop replaced the rear brake pads and disks but since then handbrake never was like before. They kept telling me it will get better which I believed at the time but it never did. Last month I've passed inspection and they told me that the rear left handbrake was almost out of spec and I'd need to check it out although it passed.

So a month later I've bought a Bosch kit, sliders, pads, grease, toolkit etc and replaced the 1 year old ferodo pads. Now handbrake is like it should be and I'm happy with it but take a look at the old pads...

Both inner side alignment pins (caliper side) are bent.

On the surface this looks fine, but w203s don't have fancy brakes. Bendix's for these are only $50-90. So they've hidden a lot of labour in that "pad" price. then they've charged you half an hour to change the discs as well. if the calipers are off the discs take about 1 minute each to change. Then did the discs really need changing? these are basic brakes. you can go 2 for 1 on discs to pads on these no problems. it may be they did need doing, but it may be they didn't. So, I'd say, it's not a rip off, compared to say a Stealer, but there is still a bit of fluff in this.

During braking po maingay like sumisipol pero minsan naman hindi lalo na kapag maulan pero depende padin. Had my breaks cleaned, from pads to cleaning talaga like baklas. Ang gamit ko po is bendix na brake pads, makapal pa po pads.

I had this problem after working on a friend's Infiniti FX35 and also using Bosch ceramic brake pads.

The problem for me was that Bosch pads have a different inside and outside pad for the rears for that vehicle. I've used Bosch pads before and never encountered this.

The pads were not marked and nothing on the box indicated there were different sides so I didn't notice. But they have protruding nubs on the backing that cause the caliper to not sit properly and increase their thickness, causing constant drag on the rotors.