Owner reviews for brake pads

I personally run Zimmermann rotors and EBC pads. No issues during heavy braking. Definitely buy quality rotors, cheap rotors warp pretty quickly.

I have had a set of OEM (centric i think) pads for a while, they have lasted well thru many mountain runs (no track days)....I am in need to new front rotors/pads, so upgrading to a slotted front and EBC yellows, going to leave the rears alone for now and see how it drives with the fronts upgraded

Yea, I imagine it was a chore. Also forgot to mention, I run Akebono euro ceramics right now and love them because of no dust, but they definitely don't have the bite of an OEM pad, but i'll likely go with another ceramic pad to keep dust down.

114k still on factory brakes all around!

For track purposes, I upgraded my rotors to stoptech slotted, pads to ferodo 2500, steel lines, and rbf600 fluid. Gets the job done, and stays consistent over the course of a typical track day. The braking power/feel is not much greater over the stock rotor/pads combo, but holds up better to the heat (those OEM pads do like to melt, if abused).

I also run Motul RBF600 fluid and Ferodo DS2500. I use my R as DD (~13K miles/year) and about 10 track days per year. Setup is fine for both and I recommend it as a good setup for your situation.

I typically run RBF600 with Ferodo DS2500, changed at the beginning of spring and after each HPDE (back to OEM brake fluid in the winter). Massive improvement over the stock for sure, but at the end of a 2 day track weekend the pedal will be on the softer side, which improves after brake flush.

I have had good success with Ferodo DS2500 pads front and rear, OEM rotors, and RBF600 (or equivalent) brake fluid. The Ferodo pads were fine to use for the street (no noise, normal dust, and seem reasonably rotor friendly) and competent on the track.

Focus ST: Con -Using brakes to offset torque steer a bit lame. And contributes to crazy brake dust

Also, the steering wheel had a good amount of vibration when applying the brakes. Told the dealer about it, and they came back to me and told me absolutely nothing was wrong and my brakes were perfect.