Spark plug AC DELCO or OEM Mazda

New Denso wires (these were the OEMs, cheaper to not pay ac delco mark up) and AC-Delco 41-962 plugs.

AC Delco/NGK.

IMHO, this is one of the times where the OEM stuff might be the best way to go, especially if your engine is otherwise stock. It's really common to see these trucks get well over 150,000 out of the original plugs and wires. They're kind of expensive but they just last so long it's worth it.

Acdelco plugs....Never had problems with either

I have a 2010 Silverado, and I had a 2011 Silverado. Go with the Delco's. It what your truck was built with, it what she will run best with.

If you do go with something else. Stick with a denso, or an NGK. Avoid Bosch plugs in that truck like the plague or you will start tripping codes.

41-156 is the new plug for the LE2 engine. Our 2016.5 got them, and they are fine. 41-123s came out of it.

Plugs need to be AC Delco 41993 (no substitution). I've had misfires with other "equivalent" plugs that went away with the correct plugs.

Rx-8 in 3years just did maintence and ned sparkplugs 0 problems.

So I went to my uncle who is a part owner of a auto parts supply company and he ordered me 5 Beck Arnley 178-8445 Direct Ignition Coils for my car and 5 ACDelco 41-806 Professional Platinum Spark plugs.

I initially got the P0101 code and did the obvious - replaced the MAF sensor. No change, same codes. Goodbye $100.

I have a 1986 blazer and replaced the spark plugs with ac delco factory spark plugs purchased from napa, about 2 months later I was driving the vehicle and the vehicle had a miss then starting blowing out oil from the Pcv vlave from excessively high crank case pressure after electrode fell out.